Draw-Tite Class V, 2-1/2 inch Trailer Hitch Receiver Draw-Tite
(Draw-Tite Part #: 45510)
This is a custom fit product, please verify fit before ordering:
Change selected vehicle
In Stock - Ready to ship today!

Delivered by 11/22/18 if ordered by 2:30pm CT today

This item is eligible for free shipping. Details

$450.77
$383.16 You Save $67.61!

Quantity
×

Item Added to Cart

View Cart & Checkout

Class V hitches are very similar to Class III & IV hitches except for the weight ratings.

Class V hitches are Weight Carrying (WC) and Weight Distributing (WD) hitches. Class V hitches used as Weight Carrying are rated up to 18,000 lbs. Gross Trailer Weight (WCGTW) with a maximum trailer Tongue Weight (WCTW) of 2,000 lbs.

Hitches that are used for Weight Distributing are rated up to 18,000 lbs. Gross Trailer Weight (WDGTW) with a maximum trailer Tongue Weight (WDTW) of 2,500 lbs.

This style of hitch uses a 2-1/2" square receiver opening. The use of a ball mount and hitch ball of the same rating or higher is required.

To use the weight distribution side of the hitch a weight distribution system is required. Class V hitches attach to the vehicle frame only.

Always consult your owner's manual for vehicle rating.

Help determining Gross Trailer Weight & Tongue Weight

  • Installation Time: 60 Minutes on 6.6 ft. bed models, 20 Minutes on 8 ft. bed models
  • No Drilling Required on 8 ft. bed models only
  • Requires removal of factory hitch if equipped.
  • Hitch crosstube is visible beneath bumper.
  • Installation requires OEM bumper and brackets
  • Minor heat shield modification may be required

Specs

Hitch ClassClass V
Receiver Size2.5 inch
GTW18,000 lbs
TW2,000 lbs
Installation InstructionsCLICK HERE
WDGTW18,000 lbs
WDTW2,500 lbs

Features

  • Limited Lifetime Warranty!

Included:

  • Mounting Hardware & Instructions

Not Included:

Installation Instructions CLICK HERE

Draw-Tite

Over fifty years and millions of trailer hitches later, our 500 dedicated employees put the same care and patience into every hitch we build today as Bill Whichello did fifty years ago. We also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles.

The basis of our continued success is that our trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.

Our trailer hitches are covered by a Nationwide/lifetime limited warranty. We have over 10,000 dealers throughout North America. So wherever you live or travel, there is always a knowledgeable and helpful Draw-Tite dealer nearby. This is especially important when you consider nearly 100% of our consumers use their trailer hitch to tow outside of their local area.

The above information has been provided by the Manufacturer, and we cannot guarantee the accuracy thereof or endorse the opinions expressed.

2011ChevroletSilverado 2500 HD
2011ChevroletSilverado 3500 HD
2011GMCSierra 2500 HD
2011GMCSierra 3500 HD
2012ChevroletSilverado 2500 HD
2012ChevroletSilverado 3500 HD
2012GMCSierra 2500 HD
2012GMCSierra 3500 HD
2013ChevroletSilverado 2500 HD
2013ChevroletSilverado 3500 HD
2013GMCSierra 2500 HD
2013GMCSierra 3500 HD
2014ChevroletSilverado 2500 HD
2014ChevroletSilverado 3500 HD
2014GMCSierra 2500 HD
2014GMCSierra 3500 HD